给门把手上油的步骤

给门把手上油的步骤

给门把手上油的具体操作步骤为:1.;用螺丝刀伸入门把手装饰盖下的小方口，转动，将门把手装饰盖拉下。2.门把手的装饰装饰取下后，用螺丝刀将圆形密封胶放在里面，拧螺丝取下。3.拆下里面的螺丝，然后拆下门把手的锁块。4.轻轻向外拉动门把手，使其与门分离，然后用润滑油重新润滑门把手、螺丝等干燥部位。E 5。润滑后，门把手可以按拆卸的相反顺序重新安装。 On the door handle: As the name implies, the door handle is used to drive the door. As of July 2019, there are a variety of doorknobs on sale, including pullout, uplift and hidden. 1. Pull out door handle: pull out the door handle when opening the door, which is the most mainstream door handle design at present. 2, carry type door handle: carry type door handle and pull type door handle modelling is same, just need to lift its when opening a door, more accord with human body workThe specific operation steps of oiling the door handle are 1. Use a screwdriver to reach into the small square mouth under the decorative cover of the door handle and turn it to pull down the decorative cover of the door handle. 2. After the decorative decoration of the door handle comes down, place the round sealing rubber inside with a screwdriver and turn the screw to remove it. 3. Remove the screws inside, and then remove the lock block of the door handle. 4. Gently pull the door handle outward so that it separates from the door, and then relubricate the dry parts such as the door handle and screws with lubricating oil. E 5. After lubrication, the door handles can be reinstalled in the reverse order of disassembly. On the door handle: As the name implies, the door handle is used to drive the door. As of July 2019, there are a variety of doorknobs on sale, including pullout, uplift and hidden. 1. Pull out door handle: pull out the door handle when opening the door, which is the most mainstream door handle design at present. 2, carry type door handle: carry type door handle and pull type door handle modelling is same, just need to lift its when opening a door, more accord with human body work